The EcoCut 3300 is designed to automatically cut all kinds of material including wire, cable, round material such as tubing, flat ribbon and Glass Fiber Optic (GOF) cable. This flexible machine processes wire up to 16 mm2 (6 AWG), cuts round material up to 12 mm (0.47”) O.D. and cuts flat material up to 100 mm (3.94”) wide.
Finance available on this product subject to credit approval
The EcoCut 3300 can cut a wide range of materials including round and flat cable, wire and tubing with precise and repeatable results. The EcoCut 3300 can be used as a stand-alone machine or can be integrated into a processing line. The EcoCut 3300 is electronically controlled and features several interfaces for peripheral components. The electrically driven rollers feed the material in increments of 0.1 mm (0.004“) to the universal cutting unit. The cutting unit is electrically driven and position controlled.
| Raw Material Diameter | Maximum 12 mm (0.47“) |
| Conductor Cross Section | Stranded Wire Max. 16 mm2 (6 AWG) Solid Wire Max. 6 mm2 (10 AWG) |
| Raw Material Width | Maximum 100 mm (3.94”) |
| Feed Rate | Maximum 1.60 m/s (5.25 ft/s) |
| Length Increment | 0.1 mm (0.004″) |
| Interfaces | Standard: Prefeeder, Hotstamp, RS232, Foot pedal Optional: Post-feed interface (CableCoiler 500, CableCoiler 1450 and inkjet) |
| Options | Air Jet Kit, Carbide Blades, Quadruple Cable Guides, Special Cable Guides |
| Noise Level | <70 dB (A) |
| Power Supply | 100 V, 115 V, 230 V or 240 V (50 – 60 Hz) |
| Dimensions (L x W x H) | 460 × 270 × 270 mm (18.1″ × 10.6″ × 10.6″) |
| Weight | 22 kg (49 lbs.) |
| CE Conformity | The EcoCut 3300 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility. |
| Important Note | Schleuniger recommends that wire / tube samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine. |
