The WireStacker 3150 is a high-performance wire stacker for the precise, axial stacking of cables. The system is available with 2.5 m (8.20 ft), 5 m (16.4 ft), 7.5 m (24.6 ft), or 10 m (32.8 ft) in length. Built in, synchronized driven transport belts allow stacking cables carefully and safely without wire jam even for very flabby wires
This machine comes as a 2.5mx2 (5m Total) it can be used as either 2.5m, 5m or a combination of both.
Raw Material Diameter
1.5 – 25.4 mm (0.06 – 1”)
Workpiece Length
2.5 m (8.2 ft/s), 5 m (16.4 ft/s), 7.5 m (24.6 ft/s), 10 m (32.8 ft/s)
Feeding Speed
Up to 4 m/s (13.1 ft/s) Synchronized with the upstream cable processing machine
Interfaces
PPI standard (I/O signals and speed information), Emergency Stop
Power Supply
110 / 115 / 230 / 240 VAC, 50 / 60 Hz
Compressed Air Connection
6 bar (90 psi)
Weight
120 kg (264.6 lbs.) for version 2.5 m (8.2 ft)
Dimensions (L x W x H)
2.5 m (8.2 ft) version:
2,805 x 610 x 1,500 mm (110.43 x 24.01 x 59.05″)
CE-Conformity
The WireStacker 3150 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Important Note
Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine.