The PreFeeder 4850 is a powerful cable feeding system for reels weighing up to 600 kg (1,320 lbs.). The system distinguishes itself through its simple design and ease of use. For easy reel handling and fast changeovers, all axes are electrically driven. The PreFeeder 4850 uses a shaftless design for easy loading and unloading of reels.
The integrated cable accumulator controls the speed of the dereeling drive. Surveillance functions provide enhanced security during set-up and operation. With this concept a cost efficient solution for a wide range of applications is achieved.
- Powerful cable feeding system for reels weighing up to 600 kg (1,320 lbs.) with a maximum diameter of 1,070 mm (42”)
- Shaftless design for easy loading and unloading of reels
- Motorized axes for fast changeovers and simple operation
- High feeding dynamic allows higher production rates and increases the economic efficiency of the processing line
Reel Diameter
400 – 1,070 mm (16 – 42“)
Reel Width
280 – 710 mm (11.0 – 28.0“)
Reel Arbor Diameter
40 – 125 mm (1.6 – 5.0“)
Reel Weight
600 kg (1,320 lbs.)
Raw Material Diameter
Maximum 35 mm (1.4“)
Rotating Speed
Up to 280 rpm, adjustable for optimized feed dynamics
Accumulator Volume
1,420 mm (56“) with 1 loop (wire up to 35 mm (1.3“))
*optional 2,900 mm (114”) with 2 loops (wire up to 16 mm (0.6“))
*optional 8,200 mm (323“) with 5 loops (for smaller wires up to 6 mm (0.2“))
Dimensions (L x W x H)
Back feeding: 2,810 x 1,750 x 1,700 mm (110 x 68 x 67“)
Right feeding: 3,170 x 1,450 x 1,700 mm (125 x 57 x 67”)
Weight
870 kg (1,918 lbs.)
Power Supply
3 x 400 VAC, N, 5 KW, compressed air 6 bar (90 psi)
Compressed Air Connection
6 bar (90 psi)
CE-Conformity
The PreFeeder 4850 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Important Note
Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine.