WDT UP-14 Crimping Press (Crimping Range 0.25 to 6 mm²)

WDT UP-14 Crimping press Pneumatic crimp press for insulated terminals up to 6mm² / copper-tube and copper-sheet terminals up to 16mm²/ end-sleeves up to 50mm².

UP 14 series

Due to its exceptional price/performance ratio, the WDT UP-14 Crimping press with scissor closing mechanism (and the special versions UP 14 BA (with hand lever) and UP 14 Z (with sequence control system)) is the ideal starter model for the mechanical processing of loose contacts. With a crimp force of around 1.4 tons, these ergonomic machines are able to process most small electrical contacts (wire-end ferrules up to 50 mm²) without any problems:

• Insulated compression cable lugs, 0.25 to 6 mm²
• Non-insulated cable lugs and crimp cable lugs, 0.5 to 16 mm²
• Insulated and non-insulated wire-end ferrules, 0.14 to 50 mm²
• Turned contacts, 0.14 to 16 mm²
• Non-insulated FASTON connectors, 0.14 to 6 mm²
• Non-insulated cable lugs and connectors, 1.0 to 6.0 mm²
• Customer-specific applications

The WDT UP-14 Crimping press machines have been developed for small and medium-sized batches (“low volume – high mix”) and offer a wide range of processing options due to the large selection of exchangeable dies and the quicker, simpler conversion to new applications. Even customer-specific solutions for special electrical contacts can be arranged following consultation.

The special UP 14 BA machine version is equipped with a hand lever for opening and closing the crimp insert in order to position the contact precisely, whilst the UP 14 Z has a sequence control system for further ensuring the process quality.

As with all WDT products, the UP 14 series impresses thanks to its high levels of quality, process reliability and above all its exceptional flexibility.

The pneumatic machines in the UP 14 series correspond to EC Directive 2011/65/EC (RoHS 2) and are CE compliant.

For langer processing ranges see our WDT UP-35 & SSC Crimping Press (Crimp Range Up To 16sqmm)